EPS Automatic Vertical Block Molding Machine

EPS automatic vertical machine adopts hydraulic system and PLC control program; and put the foamed and matured EPS beads into the mold cavity, and the steam heating system is used to make the steam directly enter the mold cavity.

Main Features：
1 .With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished.
2. This machine can produce EPS Block products with density of 6~40kg/m3, as well as fast EPS Block forming speed, uniform bonding, low moisture content, with very minor deformation.
3. The Pre-Expander Beads are fed in from the top of the machine, this will save energy, fast feeding speed, uniform density, especially suitable for light-weight EPS Block production.
4. The machine has a compact structure that occupies a very small space.
Technical parameters：

Number	Items		Unit	Type	EPSBM3000V	EPSBM5000V
1	Mould Size		mm		3050x1230x630	5060x1230x630
2	Mould Vol.		m3		2.36	3.92
3	Products Density/Spedfic Gravity		kg/m3		6~40	6~40
4	Production Capacity		block/h		3~12	2~12
5	Steam Pressure		mpa		0.6	0.6
6	Steam Inlet DN		mm		100	100
7	Compressed-Air Inlet DN		mm		40	50
8	Power Supp	Power	kw		8.5	11
		Voltage	V		380	380
9	Control Mode				Automatic	Automatic
10	Structural Features				Hydraulic Vertical Single Open-door	Hydraulic Vertical Single Open-door
11	Control System				PLC	PLC
12	Max. Outer Dimension		mm		3000x3200x4200	3100x3200x6200
13	Machine Net Weight		tons		5.5	7.5