EPS Automatic Vacuum Block Molding Machine (korea technology)

This Korea technology EPS block molding machine can produce both modified EPS fireproof products and EPS lost mold foam. The whole machine adopts Korean technology and is designed by Korean engineers. All valves are all produced in Europe or Korea.

Main Features：
1. With the use of PLC Controller (Programmable Logic Controller) and Touch Screen, the automatic looping process of opening and closing of the moulds, feeding, heating, heat preservation, cooling, mould ejection, and releasing the final product from the machine will be accomplished.
2. Adopt the auto control system on auto weighing and feeding, auto heeting and cooling.
3. Vacuum system mainly includes vacuum storage tank, vacuum cooling tank and efficient water ring vacuum pump and other components.
4 .The machine uses the heating way of top intake, bottom exhaust and cooling way of water spray system.
5. Using high-quality steel and then are welded and heat-treated, sand blasted, shot blasted, the machine is with high strength, no deformation. Block density can reach 6-40kg / m, with high speed, uniform adhesion, low moisture content, the small deformation.
6. Machine cavity is made of stainless steel plate or stainless steel wedge grid structure, with features of energy efficient, easy to disassemble to clean, easy to mold, sheet and good bonding.
7. The machine uses translation mode to open and close the door,with features of nice, fast and efficient way and safe and reliable operation.Eject the block out while the door opened. It is easy to adjust when the mold clamping gap and improve the air tightness of the machine.
8. The machine is equipped with automatic transmission and automatic electronic weighing equipment, printing equipment
9. The machine is also suitable for lost mold EPS block. 10. The machine is designed by South korean engineer, all of the valves are imported from South Korea.
Technical parameters：

No.	Item		Type/Unit	EPSBM6000V/H	EPSBM8000V/H
1	Mould Size		mm	6120×1230×1050	8110×1240×1040
2	Mould Volume		m3	7.96	10.46
3	Product Density/Specific Gravity		kg/m3	6-40	6-40
4	Production Capacity		block/h	4-12	3-11
5	Steam Pressure		Mpa	0.6	0.6
6	Steam Inlet DN		mm	150	150
7	Compressed-Air Inlet DN		mm	50	65
8	Power Supply	Power	kw	30	30
		Voltage	v	380	380
9	Control Mode			Automatic	Automatic
10	Structural Features			Hydraulic Sliding-door Vacuum Cooling	Hydraulic Sliding-door Vacuum Cooling
11	Control System			PLC with Touch Screen	PLC with Touch Screen
12	Max. Outer Dimension		Mm	14000×4000×3000	16000×4000×3000
13	Machine Net Weight		Tons	17	20
14	Automatic Conveyer			Supplied	Supplied
15	Electronic Scale			Supplied	Supplied
16	Printer			Optional	Optional