| Lead Roller Material and Quantity | The guide roller is a rubber-coated roller |
| 15-roll leveling, 7-up and 8-down | |
| Leveling roller material | 45#, hard chrome plating on the surface, heat treatment HRC46-52; |
| Motor power | 2.2KW |
| Hydraulic station configuration | share hydraulic station with shear bending |
| Uncoiler hydraulic system pressure | the last cut the head of the coil and the tail of each batch |
| No blanking shears, tool material | Cr12MoV, heat treatment hardness HRC58-62 |
| Punch and tail hole mechanism | 1 set for each left and right, can be called on both sides, and can be switched through the touch screen |
| Box and punching station | placed on a mobile bracket to achieve synchronous adjustment (manual fine-tuning) |
| Punching material | Cr12MoV |
| Width adjustment method | plate width is adjusted in the middle, controlled by servo motor |
| Working height | 900mm |
| Guide | Configure secondary guide |
| Width adjustment | On the basis of batch production, plates of different sizes are added to achieve alternate production, and the frame is processed as a whole after welding to ensure adjustment accuracy |
| Adjustment mechanism | high-precision standard linear guide |
| Transmission mode | gear sprocket transmission (all upper shafts have gears) |
| Number of molding passes | 10 moldings |
| Roller material | 45#, the outer surface of the roller is treated with high frequency HRC56-62, CNC machining, the surface of the roller is polished |
| Molding speed | about 12.5m*/min |
| Shearing method | stop shearing, blanking shearing |
| Tolerance range | After cutting, the end are automatically bent upward, and the bending angle of the end and end is 90 degrees tolerance ± 1 degree Shear length tolerance and adjacent notch tolerance is ≤0.5mm |
| Oil pump power | 4KW |
| Shearing pressure | maximum 12Mpa |
| Shear material | Cr12MoV |
| Heat treatment | HRC58-62 |
| Shearing tool | 1 set |
| Function | Automatically control cutting length and cutting quantity |
| Forming length tolerance | ≤0.5mm |
| Forming length tolerance | ≤0.2mm |
| Control voltage | 24V |
| Main components of electrical appliances | PLC (Siemens), touch screen (Siemens), encoder (Omron), dual photoelectric detection, etc. |
2.The company has a professional The Adjuster team, 24 hours to provide uninterrupted after-sales service.
(1) Installation and debugging
Equipment arrived at the customer workshop, according to the flat layout of our equipment. We will arrange experienced technicians to install, debug and test-produce the equipment, and make the equipment reach the rated production capacity of the production line.
(2) Training
Our company provides technical training for our customers. The training includes the structure and maintenance of the equipment, the control and operation of the equipment, experienced technicians will guide and establish the training program. After training, the buyer's technical personnel can master the operation and maintenance of the equipment, can adjust the process and deal with different failures.
3.After-sales quality problems within 2 hours to answer, if the telephone video guidance can not be solved, domestic 24 hours to send engineers to the site to solve the problem.
4. Factory direct sales price concessions, 40,000 square meters factory, 20 years of Export Enterprises, CE certification, patents more than 50 items.
