Hydraulic 2+2 press type

The 2+2 non-continuous laminator equipment is composed of the main engine, hydraulic drive system, loading template, loading template bracket, loading template heating system, mixing head mobile crane, anti-skid pedal, electric control system, etc.

Main feature：
1. Main machine: The main machie consists of a rack, a lifting beam, a base, a tilting device, and a track.
2. Hydraulic drive system: The hydraulic drive system consists of a hydraulic station, 8 lifting cylinders, 2 tilting cylinders, a set of lifting pumps, a set of tilting pumps, a set of pressure-maintaining pumps, and corresponding high-pressure oil pipes and valves. . Power: 11KW.
3. Loading formwork specifications: length 12.4m, width 1.4m and thickness 60mm, composed of drawn aluminum alloy. The carrier formwork is composed of a carrier formwork, a carrier formwork automatic traveling device and a die frame position adjustment device. There are a total of 5 loading templates, one of which is a fixed loading template. Power: 0.55KW×8
4. Loading formwork bracket: The loading formwork bracket is composed of brackets and rails, and is installed on the left and right sides of the host.
5. Loading template heating system: Loading template heating system consists of medium heating device, pump set, pipeline and corresponding temperature control device, one set on the left and one on the right. Power: 24KW×2.
6. Mixing head moving crane: The mixing head moving crane is composed of crane frame, X, Y direction moving block and Z direction spring balancer.
7. Anti-skid pedals: The anti-skid pedals are installed on both sides of the left and right loading template brackets and under the moving crane of the mixing head according to the requirements of the loading formwork operation.
8. Electric control system: The electric control system is centrally controlled by the electric control cabinet, equipped with corresponding buttons, relays, temperature controllers, etc.
Technical parameter：