Heating system for double conveyor

PU foam dispensed between the upper and lower coil has the perfect chemical reaction and curing process at regular temperature. This unit is designed for providing a heated air to maintain a regular temperature for such process.

Main feature：
1. PU foam dispensed between the upper and lower coil has the perfect chemical reaction and curing process at regular temperature. This unit is designed for providing a heated air to maintain a regular temperature for such process.
2. Electric heating system is the ideal power for heating device that must provide.The heated air separately to the upper and lower slat conveyor.
3. Automatic temperature control unit with overheat-proof device must be also included for a safe and good quality panel.
4. The insulated panel is needed for the housings in order to maintain the general temperature.
Technical parameters：

Design	air circular system by Gas burner
Circulating air quantity	about 10,000m3/h
Temperature control	automatic control
Frame	steel plate  & square pipe
Insulation	30~50mm(T) insulated panel
Tolerance of temperature	+- 2 °C
Fan motor	15kw, A.C motor
Fan capacity	420m3/min
Temperature control panel	Automatic control system
Plate (slat) temperature	+ 40°C ~ +70°C
Max. temp. of circulating air	+ 120 °C
Plate (slat) temperature for PIR foam	+ 60 °C
Plate (slat) temperature for PU foam	+ 40 °C

Specifications (modules)：
-Installed beside double conveyor
-Heated-air circulating equipment to suck out & in air and filters
-Duct and channel for air flow
-Automatic Control device with multi-step switch and control panel
-Overheated-air isolating device
-The panel housing for heating system to endure a high temperature.